Home » Hardware » ethernet cards » NVIDIA Corporation MCP61 Ethernet (rev a2)
ethernet card NVIDIA Corporation MCP61 Ethernet (rev a2)
Modell: NVIDIA Corporation MCP61 Ethernet (rev a2)(Modell-ID: 2105)
Andere mögliche Gerätenamen:
Gigabyte Technology Co., Ltd MCP61 Ethernet
ASRock Incorporation 939NF6G-VSTA Board
Hersteller:
NVIDIA Corporation
Hersteller-ID:Produkt-ID des Gerätes:
10de:03ef
Jahr der Markteinführung:
not-specified
Schnittstelle:
not-specified
überprüft mit Distribution:
Parabola GNU/Linux
Debian GNU/Linux 10 buster
Überbrüft mit folgendem freien Betriebssystemkern (Libre Kernel):
5.2.2-gnu-1
4.19.0-9-amd64
Funktioniert mit Freie Software?
Ja
Verwendete Freie Firmware/Treiber:
forcedeth
Beschreibung:

dmesg

[    1.770796] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    2.324526] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1a:4d:83:f2:3d
[    2.324529] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
[   20.814573] forcedeth 0000:00:07.0 eth6: renamed from eth0

lspci -vvnnk

00:07.0 Bridge [0680]: NVIDIA Corporation MCP61 Ethernet [10de:03ef] (rev a2)
	Subsystem: Gigabyte Technology Co., Ltd MCP61 Ethernet [1458:e000]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (250ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 24
	NUMA node: 0
	Region 0: Memory at f5006000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at cc00 [size=8]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME-
	Capabilities: [50] MSI: Enable+ Count=1/8 Maskable+ 64bit+
		Address: 00000000fee01004  Data: 4025
		Masking: 000000fe  Pending: 00000000
	Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
	Kernel driver in use: forcedeth
	Kernel modules: forcedeth
00:07.0 Bridge [0680]: NVIDIA Corporation MCP61 Ethernet [10de:03ef] (rev a2)
	Subsystem: Gigabyte Technology Co., Ltd MCP61 Ethernet [1458:e000]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (250ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 21
	NUMA node: 0
	Region 0: Memory at f5006000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at cc00 [size=8]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [50] MSI: Enable- Count=1/8 Maskable+ 64bit+
		Address: 0000000000000000  Data: 0000
		Masking: 00000000  Pending: 00000000
	Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
	Kernel driver in use: forcedeth
	Kernel modules: forcedeth
00:07.0 Bridge [0680]: NVIDIA Corporation MCP61 Ethernet [10de:03ef] (rev a2)
	Subsystem: ASRock Incorporation 939NF6G-VSTA Board [1849:03ef]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0 (250ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 21
	NUMA node: 0
	Region 0: Memory at fbffd000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at e480 [size=8]
	Capabilities: [44] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [50] MSI: Enable- Count=1/8 Maskable+ 64bit+
		Address: 0000000000000000  Data: 0000
		Masking: 00000000  Pending: 00000000
	Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
	Kernel driver in use: forcedeth
	Kernel modules: forcedeth

Write below your motivation

The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, commit cdeda15, available under the GNU General Public (GPLv3) License.
JavaScript license information